Apply now »

Temporary Works Coordinator

Job Category:  Construction
Contract Partner Company:  KierBam
Employing Company:  KierBAM JV

The HPC Jobs Service supports local people into exciting, long-term careers across our Project.

Temporary Works Coordinator
KierBAM
Hinkley Point C


Main Duties:


Planning & Design Coordination


Design Briefs: Prepare detailed briefs capturing site-specific constraints.
Competency Checks: Ensure designs are created by qualified engineers.
Design Verification: Check and approve all calculations and design packages before execution.
Interface Management: Coordinate temporary structures with permanent building designs.
Primary Contact: Act as the first point of contact between designers and site teams.
Value Engineering: Develop collaborative solutions with the TWD to mitigate or eliminate risks.
Risk Mitigation: Work with the TWD during drafting to address early risks.
Report Submissions: Compile and submit Temporary Works reports internally (CAT 0/1) or to the client (CAT 2/3) for formal review


Risk & Safety Management


RAMS Review: Review Risk Assessment Method Statements and communicate residual risks to site teams.
Authority to Stop: Halt any onsite operations if temporary structures appear unsafe.
Compliance Checks: Ensure operations adhere to the Health and Safety at Work Act.
Procedural Enforcement: Guarantee all site procedures and safety protocols are strictly followed.
TWS Briefing: Provide Temporary Works Supervisors (TWS) with full design details for clarity.
Maintenance & Inspections: Enforce routine maintenance and mandatory inspection regimens during use.
Permit to Load: Inspect installations and issue permits to load once verified satisfactory.
Permit to Strike: Issue permits to strike only after confirming concrete strength or EV2 test records. 


On-Site Operations & Supervision


Material Inspection: Verify the quality of structural materials upon arrival.
Hold Points: Enforce mandatory hold points to prevent premature construction steps.
Design Implementation: Ensure all installations match the latest drawing revisions.
Team Liaison: Coordinate with TWD, TWS, and Delivery teams for seamless installation and use.
Procedure Alignment: Ensure all TWS personnel operate in strict accordance with project procedures. 


Change Control & Quality Assurance


Deviation Management: Prevent unauthorised alterations by strictly managing design deviations.
Material Substitution: Check proposed material or construction changes against the original design.
Change Sign-Off: Review, formally check, and sign off on all plan modifications. 


Compliance & Administration


Standards Enforcement: Align all operations with BS 5975 guidelines and CDM 2015 regulations.
Works Register: Maintain a live onsite register and submit it monthly for client acceptance.
Traceable Logs: Document and archive all signed permits, inspection forms, and certifications.
Dismantling Oversight: Supervise the safe removal and striking of all temporary installations.
Continuous Improvement: Attend design team meetings to contribute feedback and refine processes.


Requirements:


•    Extensive prior experience as a TWC on Tier-1 major infrastructure or heavy civil engineering projects
•    Valid CITB Temporary Works Coordinator (TWCTC) qualification and a relevant engineering qualification (Degree/HND/HNC)
•    Deep understanding of BS 5975 and CDM 2015
•    Experience managing Temporary Works Registers
•    Exceptional written and verbal communication skills to effectively bridge the gap between NNB (client), designers, and delivery teams
•    Proven ability to strictly enforce procedural compliance in highly regulated environments

 

Additional Info:


•    Full-time, site-based role at the Hinkley Point C (HPC) main site office in Somerset.
•    This is a site-based engineering position. Due to the high-oversight nature of nuclear construction and the need for live, physical verification of temporary structures, consistent, daily site attendance is a mandatory requirement.

 

For this role you must have evidence of right to work in the UK. As a project, we do not discriminate on the grounds of age, gender, race, colour, religion, disability or sexual orientation, and we welcome applications from all sections of the community.

The HPC Jobs Service supports local people into exciting, long-term careers across our Project.

Temporary Works Coordinator
KierBAM
Hinkley Point C


Main Duties:


Planning & Design Coordination


Design Briefs: Prepare detailed briefs capturing site-specific constraints.
Competency Checks: Ensure designs are created by qualified engineers.
Design Verification: Check and approve all calculations and design packages before execution.
Interface Management: Coordinate temporary structures with permanent building designs.
Primary Contact: Act as the first point of contact between designers and site teams.
Value Engineering: Develop collaborative solutions with the TWD to mitigate or eliminate risks.
Risk Mitigation: Work with the TWD during drafting to address early risks.
Report Submissions: Compile and submit Temporary Works reports internally (CAT 0/1) or to the client (CAT 2/3) for formal review


Risk & Safety Management


RAMS Review: Review Risk Assessment Method Statements and communicate residual risks to site teams.
Authority to Stop: Halt any onsite operations if temporary structures appear unsafe.
Compliance Checks: Ensure operations adhere to the Health and Safety at Work Act.
Procedural Enforcement: Guarantee all site procedures and safety protocols are strictly followed.
TWS Briefing: Provide Temporary Works Supervisors (TWS) with full design details for clarity.
Maintenance & Inspections: Enforce routine maintenance and mandatory inspection regimens during use.
Permit to Load: Inspect installations and issue permits to load once verified satisfactory.
Permit to Strike: Issue permits to strike only after confirming concrete strength or EV2 test records. 


On-Site Operations & Supervision


Material Inspection: Verify the quality of structural materials upon arrival.
Hold Points: Enforce mandatory hold points to prevent premature construction steps.
Design Implementation: Ensure all installations match the latest drawing revisions.
Team Liaison: Coordinate with TWD, TWS, and Delivery teams for seamless installation and use.
Procedure Alignment: Ensure all TWS personnel operate in strict accordance with project procedures. 


Change Control & Quality Assurance


Deviation Management: Prevent unauthorised alterations by strictly managing design deviations.
Material Substitution: Check proposed material or construction changes against the original design.
Change Sign-Off: Review, formally check, and sign off on all plan modifications. 


Compliance & Administration


Standards Enforcement: Align all operations with BS 5975 guidelines and CDM 2015 regulations.
Works Register: Maintain a live onsite register and submit it monthly for client acceptance.
Traceable Logs: Document and archive all signed permits, inspection forms, and certifications.
Dismantling Oversight: Supervise the safe removal and striking of all temporary installations.
Continuous Improvement: Attend design team meetings to contribute feedback and refine processes.


Requirements:


•    Extensive prior experience as a TWC on Tier-1 major infrastructure or heavy civil engineering projects
•    Valid CITB Temporary Works Coordinator (TWCTC) qualification and a relevant engineering qualification (Degree/HND/HNC)
•    Deep understanding of BS 5975 and CDM 2015
•    Experience managing Temporary Works Registers
•    Exceptional written and verbal communication skills to effectively bridge the gap between NNB (client), designers, and delivery teams
•    Proven ability to strictly enforce procedural compliance in highly regulated environments

 

Additional Info:


•    Full-time, site-based role at the Hinkley Point C (HPC) main site office in Somerset.
•    This is a site-based engineering position. Due to the high-oversight nature of nuclear construction and the need for live, physical verification of temporary structures, consistent, daily site attendance is a mandatory requirement.

 

For this role you must have evidence of right to work in the UK. As a project, we do not discriminate on the grounds of age, gender, race, colour, religion, disability or sexual orientation, and we welcome applications from all sections of the community.

Why Join Us?

For more than 60 years, nuclear power stations in the UK have been quietly keeping Britain fuelled with massive amounts of home-grown energy.

Our teams up and down the country are proudly continuing to serve the nation – but they also have an eye on the future.

EDF is leading the UK's nuclear renaissance with the construction of a new nuclear power station at Hinkley Point C and plans for a new power station at Sizewell C in Suffolk.

Nuclear power is the most reliable, low-carbon energy source currently available to the UK. EDF is playing a key role in the development of nuclear sites, while Hinkley Point C will provide low-carbon electricity to meet 7% of the UK demand. The project is already making a positive impact on the local and national economy as well as boosting skills and education.

We’re not just building new nuclear power stations. We’re developing careers, upskilling generations and creating thousands of employment and apprenticeship opportunities across a variety of skills areas.

It takes a special kind of person to work in the nuclear energy industry and although we have thousands of them there’s always a need for more.

Our industry has a mind-boggling range of opportunities and more jobs, and in more places, than you might think. But it’s also an industry which is changing.

We’re a responsible business and proud to be Britain’s biggest generator of zero carbon electricity. With size, age and experience, we believe we can do even more.

Apply now »