Apply now »

Roto Telehandler Operator

Job Category:  Construction
Contract Partner Company:  ENKA
Employing Company:  ENKA UK

The HPC Jobs Service supports local people into exciting, long-term careers across our Project.

Roto Telehandler Operator
ENKA UK
Hinkley Point C


Main Responsibilities:


    Obey the duties and instructions given by supervisor.
    Lift and move materials, machines or products in many directions
    Clean, lubricate, and maintain mechanism such as cables, pulleys and grappling devices.
    Use of forks and winch attachments for lifting operations.
    Determine load weights and check them against lifting capacities in order to prevent overloading.
    Running, maneuvering, navigating or driving equipment.
    Interpret and use of International Hand Signaling for communication
    Inspect cables and grappling devices for wear, and install or replace cables as needed. 
    Clean, lubricate, and maintain mechanisms such as cables, pulleys, and grappling devices 
    Check ground condition and that forklift is level on the outriggers before attempting to lift and place a load
    Inspect and adjust forklift mechanisms and lifting accessories in order to prevent malfunctions and damage. 
    Good work ethic and flexibility to work overtime
    Review daily work and delivery schedules to determine orders, sequences of deliveries, and special loading instructions. 
    Respect Internal Regulation and any other regulations implemented by the Company. 
    Respect the Individual Labor Agreement requirements and to refrain from disturbing the appropriate progress of company's activity, showing a suitable behavior as per the Company's requirements.   
    To assist other departments when required, including warehousing and traffic management teams
    To assist in crating, de-crating, packing and unpacking of materials as required for lifting or transporting
    To assist with any other miscellaneous activities where requested and when not required to operate telehandler
    Shall ensure that a "zero harm" approach is taken in relation to all his acts and omissions in relation to the services and the project. Acknowledges that due to the nature of the project, nuclear safety and security are of paramount importance.
    Agrees to comply with any rule, instruction or requirement of the Company in relation to the services which the company determines, in his sole and absolute discretion, is necessary in order for the company to comply with his obligations under the nuclear site license.
    Housekeeping of the work areas; collection, segregation and disposal of wastes as required; removal of unused materials and clear the work floors to eliminate/reduce slipping or tripping risks in your work area.
    Safe use, protection, storage and care of general maintenance products, hand and power tools


You must: 


    Take care of your own health and safety and that of people who may be affected by what you do (or do not do); 
    Co-operate with others on health and safety, and not interfere with, or misuse, anything provided for your health, safety or welfare; 
    Follow the training you have received when using any work items your employer has given you.


Requirements:


    CPCS A77 Telescopic Handler 360 Slew or NPORS N010 360 Slew Telehandler
    Can achieve Security Clearance (BPSS)
    Hold or Can achieve CCNSG Safety Passport
    Accustomed to work in adverse weather conditions while obeying all HSE regulations
    Minimum 5 years of experience operating similar equipment
    Able to pass Safety Critical Medical Test

 

For this role you must have evidence of right to work in the UK. As a project, we do not discriminate on the grounds of age, gender, race, colour, religion, disability or sexual orientation, and we welcome applications from all sections of the community.

The HPC Jobs Service supports local people into exciting, long-term careers across our Project.

Roto Telehandler Operator
ENKA UK
Hinkley Point C


Main Responsibilities:


    Obey the duties and instructions given by supervisor.
    Lift and move materials, machines or products in many directions
    Clean, lubricate, and maintain mechanism such as cables, pulleys and grappling devices.
    Use of forks and winch attachments for lifting operations.
    Determine load weights and check them against lifting capacities in order to prevent overloading.
    Running, maneuvering, navigating or driving equipment.
    Interpret and use of International Hand Signaling for communication
    Inspect cables and grappling devices for wear, and install or replace cables as needed. 
    Clean, lubricate, and maintain mechanisms such as cables, pulleys, and grappling devices 
    Check ground condition and that forklift is level on the outriggers before attempting to lift and place a load
    Inspect and adjust forklift mechanisms and lifting accessories in order to prevent malfunctions and damage. 
    Good work ethic and flexibility to work overtime
    Review daily work and delivery schedules to determine orders, sequences of deliveries, and special loading instructions. 
    Respect Internal Regulation and any other regulations implemented by the Company. 
    Respect the Individual Labor Agreement requirements and to refrain from disturbing the appropriate progress of company's activity, showing a suitable behavior as per the Company's requirements.   
    To assist other departments when required, including warehousing and traffic management teams
    To assist in crating, de-crating, packing and unpacking of materials as required for lifting or transporting
    To assist with any other miscellaneous activities where requested and when not required to operate telehandler
    Shall ensure that a "zero harm" approach is taken in relation to all his acts and omissions in relation to the services and the project. Acknowledges that due to the nature of the project, nuclear safety and security are of paramount importance.
    Agrees to comply with any rule, instruction or requirement of the Company in relation to the services which the company determines, in his sole and absolute discretion, is necessary in order for the company to comply with his obligations under the nuclear site license.
    Housekeeping of the work areas; collection, segregation and disposal of wastes as required; removal of unused materials and clear the work floors to eliminate/reduce slipping or tripping risks in your work area.
    Safe use, protection, storage and care of general maintenance products, hand and power tools


You must: 


    Take care of your own health and safety and that of people who may be affected by what you do (or do not do); 
    Co-operate with others on health and safety, and not interfere with, or misuse, anything provided for your health, safety or welfare; 
    Follow the training you have received when using any work items your employer has given you.


Requirements:


    CPCS A77 Telescopic Handler 360 Slew or NPORS N010 360 Slew Telehandler
    Can achieve Security Clearance (BPSS)
    Hold or Can achieve CCNSG Safety Passport
    Accustomed to work in adverse weather conditions while obeying all HSE regulations
    Minimum 5 years of experience operating similar equipment
    Able to pass Safety Critical Medical Test

 

For this role you must have evidence of right to work in the UK. As a project, we do not discriminate on the grounds of age, gender, race, colour, religion, disability or sexual orientation, and we welcome applications from all sections of the community.

Why Join Us?

For more than 60 years, nuclear power stations in the UK have been quietly keeping Britain fuelled with massive amounts of home-grown energy.

Our teams up and down the country are proudly continuing to serve the nation – but they also have an eye on the future.

EDF is leading the UK's nuclear renaissance with the construction of a new nuclear power station at Hinkley Point C and plans for a new power station at Sizewell C in Suffolk.

Nuclear power is the most reliable, low-carbon energy source currently available to the UK. EDF is playing a key role in the development of nuclear sites, while Hinkley Point C will provide low-carbon electricity to meet 7% of the UK demand. The project is already making a positive impact on the local and national economy as well as boosting skills and education.

We’re not just building new nuclear power stations. We’re developing careers, upskilling generations and creating thousands of employment and apprenticeship opportunities across a variety of skills areas.

It takes a special kind of person to work in the nuclear energy industry and although we have thousands of them there’s always a need for more.

Our industry has a mind-boggling range of opportunities and more jobs, and in more places, than you might think. But it’s also an industry which is changing.

We’re a responsible business and proud to be Britain’s biggest generator of zero carbon electricity. With size, age and experience, we believe we can do even more.

Apply now »