Apply now »

Plating Working Chargehand (Blue Hat)

Job Category:  Construction
Contract Partner Company:  ENKA
Employing Company:  ENKA UK

The HPC Jobs Service supports local people into exciting, long-term careers across our Project.

 

Plating Working Chargehand (Blue Hat)
ENKA UK
Hinkley Point C 


Main Responsibilities

 

    Responsible to ensure that all necessary permit to work documents, drawings, materials, equipment are available and ensure coordination with other teams and departments.
    Follow established job-site safety and regulations and maintain a safe and clean work area.
    Review and interpret preassembly and installation drawings
    Check the measurements before and after welding to ensure they are within project tolerances.
    Check the withdrawn material against MWR if they are the correct required material
    Organize the work activities, assign manpower and equipment for the work activities after getting the work permit and approved drawings.
    To ensure works is done in accordance with the latest revision of the drawings.
    To ensure safety working conditions of the working area before starting to work.
    To conduct or attend safety toolbox meetings and DABS meetings every morning.
    To report any unsafe situation or condition to his supervisor and safety officer and stop working.
    To report the extra need of consumable material to the black hat supervisor.
    Organization and supervision of all types of works of different complexity levels performed by mechanical fitters crew for preassembly or installation of equipment.
    Control over quality and timeliness of works performed by mechanical fitter crews.
    Responsible to inspect and test all equipment to ensure that they are functioning correctly and are free from any defects.
    Shall ensure that a "zero harm" approach is taken in relation to all his acts and omissions in relation to the services and the project. Acknowledges that due to the nature of the project, nuclear safety and security are of paramount importance.
    Agrees to comply with any rule, instruction or requirement of the Company in relation to the services which the company determines, in his sole and absolute discretion, is necessary in order for the company to comply with his obligations under the nuclear site license.
    Housekeeping of the work areas; collection, segregation and disposal of wastes as required; removal of unused materials and clear the work floors to eliminate/reduce slipping or tripping risks in your work area.
    Safe use, protection, storage and care of general maintenance products, hand and power tools

 

You must: 


    Take care of your own health and safety and that of people who may be affected by what you do (or do not do); 
    Co-operate with others on health and safety, and not interfere with, or misuse, anything provided for your health, safety or welfare; 
    Follow the training you have received when using any work items your employer has given you.

 


Qualifications

 

    Level 3 Apprenticeship in Engineering Construction-Plating or Engineering fitter or Certificate of Apprenticeship in Plating or ACE Card demonstrating Level 3 Diploma in Plating or Mechanical/Engineering Fitter.
    Hold LATS or SSSTS or IOSH Managing Safety Certificates
    Can achieve Security Clearance (BPSS)
    Hold or Can achieve CCNSG Safety Passport.

 


Experience

 

    Have minimum 10 years of work experience.

 

 

For this role you must have evidence of right to work in the UK. As a project, we do not discriminate on the grounds of age, gender, race, colour, religion, disability or sexual orientation, and we welcome applications from all sections of the community.

The HPC Jobs Service supports local people into exciting, long-term careers across our Project.

 

Plating Working Chargehand (Blue Hat)
ENKA UK
Hinkley Point C 


Main Responsibilities

 

    Responsible to ensure that all necessary permit to work documents, drawings, materials, equipment are available and ensure coordination with other teams and departments.
    Follow established job-site safety and regulations and maintain a safe and clean work area.
    Review and interpret preassembly and installation drawings
    Check the measurements before and after welding to ensure they are within project tolerances.
    Check the withdrawn material against MWR if they are the correct required material
    Organize the work activities, assign manpower and equipment for the work activities after getting the work permit and approved drawings.
    To ensure works is done in accordance with the latest revision of the drawings.
    To ensure safety working conditions of the working area before starting to work.
    To conduct or attend safety toolbox meetings and DABS meetings every morning.
    To report any unsafe situation or condition to his supervisor and safety officer and stop working.
    To report the extra need of consumable material to the black hat supervisor.
    Organization and supervision of all types of works of different complexity levels performed by mechanical fitters crew for preassembly or installation of equipment.
    Control over quality and timeliness of works performed by mechanical fitter crews.
    Responsible to inspect and test all equipment to ensure that they are functioning correctly and are free from any defects.
    Shall ensure that a "zero harm" approach is taken in relation to all his acts and omissions in relation to the services and the project. Acknowledges that due to the nature of the project, nuclear safety and security are of paramount importance.
    Agrees to comply with any rule, instruction or requirement of the Company in relation to the services which the company determines, in his sole and absolute discretion, is necessary in order for the company to comply with his obligations under the nuclear site license.
    Housekeeping of the work areas; collection, segregation and disposal of wastes as required; removal of unused materials and clear the work floors to eliminate/reduce slipping or tripping risks in your work area.
    Safe use, protection, storage and care of general maintenance products, hand and power tools

 

You must: 


    Take care of your own health and safety and that of people who may be affected by what you do (or do not do); 
    Co-operate with others on health and safety, and not interfere with, or misuse, anything provided for your health, safety or welfare; 
    Follow the training you have received when using any work items your employer has given you.

 


Qualifications

 

    Level 3 Apprenticeship in Engineering Construction-Plating or Engineering fitter or Certificate of Apprenticeship in Plating or ACE Card demonstrating Level 3 Diploma in Plating or Mechanical/Engineering Fitter.
    Hold LATS or SSSTS or IOSH Managing Safety Certificates
    Can achieve Security Clearance (BPSS)
    Hold or Can achieve CCNSG Safety Passport.

 


Experience

 

    Have minimum 10 years of work experience.

 

 

For this role you must have evidence of right to work in the UK. As a project, we do not discriminate on the grounds of age, gender, race, colour, religion, disability or sexual orientation, and we welcome applications from all sections of the community.

Why Join Us?

For more than 60 years, nuclear power stations in the UK have been quietly keeping Britain fuelled with massive amounts of home-grown energy.

Our teams up and down the country are proudly continuing to serve the nation – but they also have an eye on the future.

EDF is leading the UK's nuclear renaissance with the construction of a new nuclear power station at Hinkley Point C and plans for a new power station at Sizewell C in Suffolk.

Nuclear power is the most reliable, low-carbon energy source currently available to the UK. EDF is playing a key role in the development of nuclear sites, while Hinkley Point C will provide low-carbon electricity to meet 7% of the UK demand. The project is already making a positive impact on the local and national economy as well as boosting skills and education.

We’re not just building new nuclear power stations. We’re developing careers, upskilling generations and creating thousands of employment and apprenticeship opportunities across a variety of skills areas.

It takes a special kind of person to work in the nuclear energy industry and although we have thousands of them there’s always a need for more.

Our industry has a mind-boggling range of opportunities and more jobs, and in more places, than you might think. But it’s also an industry which is changing.

We’re a responsible business and proud to be Britain’s biggest generator of zero carbon electricity. With size, age and experience, we believe we can do even more.

Apply now »